The problem is probably in the high water content in the system is the evaporator and the absorber

LinkBack LinkBack URL About LinkBacks Bookmark & Share Digg this Thread! Add Thread to del.icio.us Bookmark in Technorati Tweet this thread Thread Tools Print this Page / Show a Printable Version Email this Page Subscribe to this Thread ...
The chiller Hi ls making butter. Capacity chiller 200 trunks. uwf argus These chillers were two Asrh direct flame. Water Tower and Water Tower, a hole in the condenser and the evaporator, the evaporator drain water that collects in our facility for alcohol uwf argus and lithium bromide as a white charger. After cooling uwf argus to around 9 degrees through the chiller setup, but not enough to come up to 6-7 degrees. uwf argus The facility does him any other way, what do you think? What's the balance between the refrigerant and lithium bromide be effective? uwf argus Nothing to do with it? Please come to me.
The problem is probably in the high water content in the system is the evaporator and the absorber chiller glass ls your site to look up: If this value is above the upper half of the evaporator should be almost non-was and if it should be in the be adjusted.
Score of 12
Hello dear friend, do not worry one - well, vacuum devices, not 2 - the Ryyz water or low Lytyyvm be the problem into 3 - Do not Lick 4 - not too much or too little water 5 - Lytyyvm not add every year with the addition of a little work left to They are careful to give me an answer
Chrlr ls absorption chiller chiller, absorption chiller difficult uwf argus problem to troubleshoot direct flame absorption chiller
Contact Management: 09126092794 Fax Board: 02142695037 copying of the contents of the logos and the name of the author of that article is permitted Forum